半固态成型镁合金组织及性能研究

半固态成型镁合金组织及性能研究

半固态成型镁合金组织及性能研究

摘要:在21世纪有许多发展前途优良的新兴技术,其中半固态金属加工技术就是近成型技术之一。然而,镁合金作为一种绿色工程材料,结合半固态成型技术解决了镁合金溶液由于易于氧化燃烧,常规成型加工困难,质量难以调控等难题并且它有着很多优秀的性能,在很多领域都有着不俗的表现。
关键词:半固态、镁合金、半固态成型
Microstructure and properties of semi solid magnesium alloy
Abstract:In twenty-first Century there are many emerging technology, which is good for the development of new technologies, including semi solid metal processing technology is one of the near forming technology. However, magnesium alloy as a green engineering material, combined with semi solid forming technology to solve the solution of magnesium alloys due to the ease of oxidation and burning, conventional processing difficulties, quality is difficult to control the problem and it has a lot of excellent performance, has a decent performance in many fields. This paper mainly for everyone on summarize the basic properties of semi solid forming magnesium alloy organization, including semi solid forming principle, technical characteristics; semi solid metal features; including an overview of relevant
Keywords: semi solid, magnesium alloy, semi solid forming

 

 


目录
一、前言........................................................................................................................................2
  1.1镁合金介绍.........................................................................................................3                   
  1.2 镁合金半固态成型工艺的应用现状和发展前景............................................5 
  1.3半固态金属成型技术.........................................................................................3
    1.3.1半固态制造成型的特点..............................................................................4
1.3.2半固态成型胚料的制备方法..............................................................................7
1.3.3触变成型.............................................................................................................9
  1.4 本课题的研究内容和目的..............................................................................10
二、AZ91D镁合金半固态剪切流变性实验..............................................................11
   2.1  AZ91D简介...................................................................................................11
   2.2 试验的主要仪器............................................................................................12
   2.3  实验..............................................................................................................12
     2.3.1 实验工艺.................................................................................................13
     2.3.2 实验工艺的选取.....................................................................................13
     2.3.3 实验过程.................................................................................................13
   2.4试验结果分析与讨论.....................................................................................13
   2.5讨论.................................................................................................................15
   2.6实验小结.........................................................................................................15
三、.镁合金半固态压铸缺陷分析与避免研究.........................................................16
   3.1气孔缺陷.........................................................................................................16
   3.2 缩孔、缩松缺陷.............................................................................................17
   3.3 夹杂、外形尺寸偏差.....................................................................................18
   3.4 冷隔和充型不良............................................................................................18
四、参考文献..............................................................................................................19


参考文献:
【1】戴起勋,金属材料学,化学工业出版社,2005.
【2】文九巴,材料科学与工程,哈尔滨工业大学出版社,2007.
【3】康俊远,模具材料与表面处理,北京理工大学出版社,2007.
【4】徐勇军,工程材料基础与模具材料,化学工业出版社,2008.
【5】郑小平,AZ91D镁合金半固态触变成形工艺,哈尔滨理工大学,2005
【6】高晓龙,纯镍细化剂的选择与细化机理初探,兰州理工大学,2009

 

 

暂时没有评论

真实

多重认证,精挑细选的优质资源 优质老师。

安全

诚实交易,诚信为本。

保密

所有交易信息,都为您保密。

专业

10年专业经验,10年来帮助无数学子。